GSBmbH

Saganer Straße 26
90475 Nürnberg

+49 (0)911 97911-0
info@gsbmbh.com

HYDROSAFE®

Fire protection casting and filling compound

  • general construction supervision test report
    Nr. P-3943/8797
  • construction material class A1 according to DIN 4102-1 part 1

Provisions of the state construction laws:

When installing components in terms of fire safety regulations into walls and ceilings, the resulting gaps are to be filled with non-flammable materials of construction material class A1.

Preliminaries - processing time:

Hydrosafe fire protection casting compound is to be mixed with the required amount of water. Immediately after, the encapsuling can be started. When mixed, the compound will remain fluid up to one hour. Additional compressing after spreading the compound is not necessary either.

Special features:

In the case of fire, HYDROSAFE fire protection casting compound offers a high level of efficiency. The substances anhydrite and alpha hemihydrate contained in the casting compound are almost completely converted into calcium sulfate dihydrate by the added water. During this process, almost 95% of the water is converted into crystalline water. The crystalline water will be re-liquified at about 140° C and will be released. This process will absorb great amounts of energy in the case of fire

Bundle options:

HYDROSAFE fire protection casting and filling compound is available in several bundle options:

 Packagingfilling volume
Casting compound bag 20 kg
Casting & filling compound bucket 10 kg
Casting & filling compound bucket 5 kg

 

If you are planning on purchasing a large volume, you may want to consider the following packaging units.

 bundle optionquantity/pallet
Casting compound bag à 20 kkg 50 bags
Casting & filling compound bucket à 10 kg 32 buckets
Casting & filling compound bucket à 5 kg 56 buckets

 

Productvideo

 

Practical application

HYDROSAFE fire protection casting and filling compound does not need to be used with special tools. It is able to reach and fill the smallest of gaps.

HYDROSAFE fire protection casting compound

Due to its ease of application, HYDROSAFE fire protection casting compound is especially well suited for the filling of thermo units, fire dampers, door and window frames, ceiling breakthroughs, pipe and channel openings, mounting frames of all kinds and separator plates

HYDROSAFE fire protection filling compound

Due to its ease of application, HYDROSAFE fire protection filling compound is especially well suited for filling and sealing gaps and tears against fire and smoke. Of course, our filling compound can also be used for the filling of thermo units, fire dampers, door and window frames, ceiling breakthroughs, pipe and channel openings, mounting frames of all kinds and separator plates.

 

hydrosafe anwendung

 

Instructions for use:

HYDROSAFE fire protection casting and filling compound shall be mixed with water until smooth using a stirrer or a whisk.

 

HYDROSAFE dried goods/kgwater/lusable mass/l
20 kg 4,4 l 12 l
10 kg 2 l 6 l
5 kg 1 l 3 l

 

Technology

 HYDROSAFE fire protection casting compoundHYDROSAFE fire protection filling compound
colour light grey light grey
consistency powder powder
bulk weight 0,8 kg/dm3 1,92 kg/dm3
dry bulk density 1,96 kg/dm3  
yield 0,6 l/kg 0,6 l/kg
processing temperature + 5 °C bis + 35 °C + 5 °C bis 35 °C
processing time ca. 60 min ca. 30 min
shrinkage / flow spread 25 cm (Vicard-Ring) 0,25 mm/lfd m min
fresh matter density 2,1 kg/dm³ 2,1 kg/dm³
air void content > 10 % > 10 %
water absorption when dry 2,13 %/24 h 2,13 %/24h
drying time (coating thickness) 1 Tag/mm 1 Tag/mm
setting time (until resilient) 6 h 12 h
cleaning using water (mechanical) using water (mechanical)
Lastorage dry on (wooden) pallet dry on (wooden) pallet
storage life 6 months 6 months
storage temperature not > 35 °C not > 35 °C